求解答关于mac层结构与多标签定位中定义的数据包的关系

搬砖的萌新

代码源自@tuzhuke大佬分享多标签定位

/* Frames used in the ranging process. See NOTE 2 below. */
static uint8 rx_poll_msg[] =  {0x41, 0x88, 0, 0x0, 0xDE, 'W', 'A', 'V', 'E', 0x21, 0, 0};


我看代码下方的注释说这个定义符合mac层标准的数据帧编码
2. The messages here are similar to those used in the DecaRanging ARM application (shipped with EVK1000 kit). They comply with the IEEE
*    802.15.4 standard MAC data frame encoding and they are following the ISO/IEC:24730-62:2013 standard. The messages used are:


按照底下数据包的注释来看，数据包前面的定义明明和mac层的头部帧控制字段不一样
此处存在疑问，求高手解答